Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Tire Pressure" Light on a Suzuki

Model: Suzuki S Cross MK 1 - Years 2013-2019
Part: Warning light – error code

Before you begin, turn on the instrument cluster without starting the engine. To do this, simply insert the key into the ignition and turn it to position 1. Then, press and hold the button next to the speedometer for a few seconds. This will make the message disappear for a moment; to prevent it from reappearing, inflate the tyres to 2.5 bar and drive for a few miles. This will make the low tyre pressure message disappear, successfully completing the reset of the light.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
Suzuki S Cross (2013-2019 / MK 1) To reset the tyre pressure light on the Suzuki S-Cross, turn on the ignition by inserting the key and turning it. Once the ignition is on, navigate t…
Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Suzuki S Cross (2013-2019 / MK 1) In this video tutorial, you will learn how to reset the tyre pressure warning light on the Suzuki S-Cross by following the instructions below. First,…
How to Reset the Tyre Warning Light on a Suzuki S-Cross
Suzuki S Cross (2021-2026 / MK 2) In the short video posted here, we can see the Suzuki S-Cross, the vehicle in question. It is equipped with electronic sensors to monitor tyre pressu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos