Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard Trim on Suzuki Swift MK4

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Dashboard

In this video tutorial, you will learn how to remove the passenger side dashboard trim on the fourth series Suzuki Swift by following the instructions below. First, get in the vehicle and start by removing the glove compartment, unscrewing all the screws; then unscrew the screws located under the dashboard using a socket spanner, as shown in the video. At this point, pry the dashboard trim to unclip and remove it; this will allow access to the airbag, applying the reverse procedure for reassembly!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the Suzuki Swift 4
Where to Find the OBD Port on the Suzuki Swift 4
Suzuki Swift (2004-2010 / MK 4, Rs41) If you want to connect a professional diagnostic tool to your Suzuki Swift Mk4 (year 2004-2010) but do not know where the OBD port is located, just r…
Resetting Errors on Suzuki Swift
Resetting Errors on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the maintenance light on the dashboard of your Swift? What to do? Let's reset the oil light. Turn on the dashboard of the Suzuki Swift with the ap…
How to remove the multimedia screen from a Suzuki Swift
How to remove the multimedia screen from a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this video we see how to remove the multimedia screen of the stereo from a Suzuki Swift: first we need to remove the plastic trim located inside t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos