Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Suzuki Vitara?

Model: Suzuki Vitara LY - Years 2015-2024
Part: Service warning light

To reset the Service light on the Suzuki Vitara, turn on the ignition and press the button located at the top right of the display. This will bring up a menu that you can navigate by rotating the same button until you select "Oil change". Move to the "Reset OC" option and hold the button for a few seconds; the Service light will be successfully reset. After the procedure, you can return to the main screen of the instrument cluster; you can also turn it off and on again to verify that the reset has occurred correctly.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Suzuki Vitara?
How to Reset the "Service" Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) Good morning, today’s objective is to reset the "Service" light on your Suzuki Vitara. Start by sitting in the driver’s seat, then turn on the instru…
How to Reset the Service Light on the Suzuki Vitara?
How to Reset the Service Light on the Suzuki Vitara?
Suzuki Vitara (2005-2015 / JT) To reset the Service light on the Suzuki Vitara, turn the key to power on the instrument cluster to check if the light is on. At this point, turn off…
How to Reset the Service Light on a Suzuki Vitara?
How to Reset the Service Light on a Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) To reset the Service light on a Suzuki Vitara, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights up, navi…

    Frequently Asked Questions

    • Vitara 2015-2024 - How to reset the Suzuki Vitara "Change engine oil" warning light? Read answer
    • Vitara 2015-2024 - What is the oil warning light in the Suzuki Vitara and what does it indicate? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos