Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter on Suzuki Jimny

Model: Suzuki Jimny Jb74w, Jb64w - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

Open the bonnet and place the support rod. To access the pollen filter compartment, simply open the two plastic clips by hand and lift the cover. Now, remove the filter and insert the new one you purchased.

To ensure it is positioned correctly, there is a plastic tab that serves as a reference and must fit into the compartment. Therefore, insert the new filter as described and close the cover by repositioning the clips.

As you can see, this is an extremely simple operation that certainly does not require a trip to the garage.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Suzuki Jimny MK2
Replacing the Cabin Air Filter on a Suzuki Jimny MK2
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) In this short video, you will see how to remove and replace the cabin air filter or air conditioning filter on the second series Suzuki Jimny in simp…
How to Replace the Cabin Air Filter of the Suzuki Jimny
How to Replace the Cabin Air Filter of the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This guide shows you the steps to remove and replace the cabin air filter of the Suzuki Jimny. First, get into the passenger side of the vehicle and …
Replacing the Cabin Air Filter on the Suzuki Jimny MK1
Replacing the Cabin Air Filter on the Suzuki Jimny MK1
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) In this short and simple guide, you will see the procedure needed to remove and replace the cabin air filter on the first series Suzuki Jimny, in sim…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos