Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter of the Suzuki Jimny

Model: Suzuki Jimny Jb64w, Jb74w - Years 2018-2026
Part: Cabin air filter

This guide shows you the steps to remove and replace the cabin air filter of the Suzuki Jimny. First, get into the passenger side of the vehicle and open the glove compartment; then remove the plastic cover of the pollen filter box to take out the cartridge, as shown in the video. At this point, install the new cabin air filter in the correct orientation (usually indicated by arrows printed on the filter), then refit the plastic cover and finally the glove compartment!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on a Suzuki Jimny MK2
Replacing the Cabin Air Filter on a Suzuki Jimny MK2
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) In this short video, you will see how to remove and replace the cabin air filter or air conditioning filter on the second series Suzuki Jimny in simp…
Replacing Air Filter on a Suzuki Jimny
Replacing Air Filter on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Replace the air filter at each service interval. Open the car door, pull up the lever to open the engine compartment, and lift the front bonnet, secu…
Replacing the Cabin Air Filter on the Suzuki Jimny MK1
Replacing the Cabin Air Filter on the Suzuki Jimny MK1
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In this short and simple guide, you will see the procedure needed to remove and replace the cabin air filter on the first series Suzuki Jimny, in sim…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos