Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Suzuki Baleno

Model: Suzuki Baleno MK 2 - Years 2015-2026
Part: Headlight bulb

To replace a headlight bulb on this vehicle, possibly upgrading to an LED model, follow the instructions in this video and description. After opening the bonnet, locate the rubber cover on the rear side of the headlamp that needs to be removed. Disconnect the connector, then unclip the steel retaining clip of the bulb and remove the lamp. Take the new bulb, being careful not to touch it with your fingers, and insert it into the headlamp. Reconnect the power connector and finally replace the plastic cover.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Suzuki Baleno
How to Replace the Battery in a Suzuki Baleno
Suzuki Baleno (2015-2026 / MK 2) To replace the battery in a Suzuki Baleno, open the bonnet to access the components inside the engine bay. On the right side, you will find the batte…
How to change the time on a Suzuki Baleno?
How to change the time on a Suzuki Baleno?
Suzuki Baleno (2015-2026 / MK 2) To change the time on a Suzuki Baleno, you must use the button below the instrument panel to enter the settings menu. Once in the menu, look for the …
Where is the Fuel Filter Located on the Suzuki Baleno?
Where is the Fuel Filter Located on the Suzuki Baleno?
Suzuki Baleno (1995-2002 / MK 1) In this video, you can see where the fuel filter is located on the Suzuki Baleno and how to proceed if you need to replace it. As shown, it is positi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos