Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs with LED Models on the Suzuki Palette

Model: Suzuki Palette MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

Video tutorial

You can customize the vehicle by replacing the headlight bulbs with LED models (aftermarket). To do this, follow these steps: reach behind the headlight assembly and locate the rubber cover at the back of the headlight.

Disconnect the power connector and rotate the bulb a half turn to release it from the headlight. Then, take the new bulb and secure it in the headlight by rotating it a half turn.

Finally, reconnect the power connector and close the rear compartment of the headlight with the rubber cap.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Suzuki Palette?
How to Replace the Air Filter on a Suzuki Palette?
Suzuki Palette (2008-2013 / MK 1) To replace the air filter on a Suzuki Palette, open the hood to access the air filter box located in the center of the engine compartment. Release th…
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) This guide explains the procedure to disassemble and replace the front brake discs and pads of the Suzuki Palette. First, lift the vehicle and remove…
How to Replace the Front Control Arms on a Suzuki Palette
How to Replace the Front Control Arms on a Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In today's tutorial video, you will see the guide that will allow you to remove and replace the front control arms on a Suzuki Palette in simple and …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos