Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Discs and Pads of the Suzuki Palette

Model: Suzuki Palette MK 1 - Years 2008-2013
Part: Brake rotors

This guide explains the procedure to disassemble and replace the front brake discs and pads of the Suzuki Palette. First, lift the vehicle and remove the front wheel. Then, unscrew the fastening bolts located at the back of the brake caliper using a socket wrench, as shown in the video. At this point, remove the old pads and unscrew the brake disc bolts; then install the new disc, reassembling the new brake pads, following the video tutorial to the end!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Rotor on the Suzuki Palette
How to Replace the Rear Brake Rotor on the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In this guide, we will see the procedure to remove and replace the rear brake rotor on the Suzuki Palette. First, raise the vehicle and start by remo…
How to Replace the Front Control Arms on a Suzuki Palette
How to Replace the Front Control Arms on a Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In today's tutorial video, you will see the guide that will allow you to remove and replace the front control arms on a Suzuki Palette in simple and …
How to Clean the Rear Brakes of the Suzuki Palette
How to Clean the Rear Brakes of the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) This guide shows how to clean the rear drum brake of the Suzuki Palette. First, lift and secure the vehicle. Next, remove the wheel to access the bra…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos