Do it yourself
| ||||
|
Suzuki Palette - Video tutorial
Model: Suzuki Palette
MK 1
- Years 2008-2013 The guide shows how to clean the Suzuki Palette rear drum brake. The first operation to be performed is to lift and secure the vehicle. At this point it is necessary to remove the rim in order to access the brake assembly. Remove the hub protection cover using a screwdriver. Knock off the hub bolt lockout flange and remove this item with a wrench. Extract the lid of the drum, if it does not come out, help yourself with a few hammers on the piece. Use a brake spray to clean the internal parts of the brake and clean the residues. Reassemble everything in position and check the correct functioning of the brake.
Posted on 24 May 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |