Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster on the Suzuki Palette

Model: Suzuki Palette MK 1 - Years 2008-2013
Part: Instrument cluster

Here’s how to remove and replace the instrument cluster on the Suzuki Palette, following these simple and quick steps. First, get inside the vehicle and start by removing the plastic cover on the side of the instrument cluster, as well as the one on the dashboard. Then, unscrew the mounting screws located on the sides of the instrument cluster, disconnecting the electrical connectors found at the back to remove it and replace it with the new one, as shown in the video. At this point, install the new instrument cluster, following the video to the end!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Control Arms on a Suzuki Palette
How to Replace the Front Control Arms on a Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In today's tutorial video, you will see the guide that will allow you to remove and replace the front control arms on a Suzuki Palette in simple and …
How to Replace the Rear Brake Rotor on the Suzuki Palette
How to Replace the Rear Brake Rotor on the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In this guide, we will see the procedure to remove and replace the rear brake rotor on the Suzuki Palette. First, raise the vehicle and start by remo…
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
How to Replace the Front Brake Discs and Pads of the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) This guide explains the procedure to disassemble and replace the front brake discs and pads of the Suzuki Palette. First, lift the vehicle and remove…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos