Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Suzuki Palette?

Model: Suzuki Palette MK 1 - Years 2008-2013
Part: Key

As shown in this tutorial, replacing the remote battery of the Suzuki Palette is an extremely simple and quick task. For this, you will need a replacement CR2032 battery and a small flathead screwdriver. First, press the button on the back and remove the emergency metal key, then use the screwdriver to pry in the indicated slot until you completely separate the two halves of the remote. Once done, you can proceed with the battery replacement, making sure to position the replacement battery in the correct orientation.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Instrument Cluster on the Suzuki Palette
How to Replace the Instrument Cluster on the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) Here’s how to remove and replace the instrument cluster on the Suzuki Palette, following these simple and quick steps. First, get inside the vehicle …
How to Replace the Air Filter on a Suzuki Palette?
How to Replace the Air Filter on a Suzuki Palette?
Suzuki Palette (2008-2013 / MK 1) To replace the air filter on a Suzuki Palette, open the hood to access the air filter box located in the center of the engine compartment. Release th…
How to Replace the Rear Brake Rotor on the Suzuki Palette
How to Replace the Rear Brake Rotor on the Suzuki Palette
Suzuki Palette (2008-2013 / MK 1) In this guide, we will see the procedure to remove and replace the rear brake rotor on the Suzuki Palette. First, raise the vehicle and start by remo…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos