Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Headlight bulb

Today, see the steps to remove and replace the front headlamp bulb on a Suzuki Jimny. First, open the bonnet of your car and start by removing the rubber cap found behind the headlamp; then disconnect the electrical connector and unclip the metal spring to remove the dipped beam bulb, as shown in the video. At this point, install the new bulb inside the headlamp, of the correct type (in this case, a bulb with an H4 fitting); connect it and refit the rubber cover of the bulbs!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Headlamp Bulbs on a Suzuki Jimny
Remove the Headlamp Bulbs on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Remove the headlamp bulbs on a Suzuki Jimny. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it wi…
Replacing the H4 Bulb in the Suzuki Jimny
Replacing the H4 Bulb in the Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) As usual, to carry out maintenance work on your car, it is good practice to securely block the vehicle on a level surface or place it on a ramp. For …
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Follow the steps below to remove and replace the front headlamps on a Suzuki Jimny, following the instructions provided. First, open the bonnet and b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos