Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs on the Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

This guide shows how to remove and replace the engine spark plugs on the Suzuki SX4, following the instructions below. First, open the bonnet of your car and start unscrewing the fastening screws of the upper engine cover; then remove the spark plug connectors by disconnecting the electrical connectors and unscrewing the coil screws, as shown in the video.

At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (having the same thread pitch); install the new spark plugs, applying the correct torque!


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Suzuki SX4
How to Replace the Spark Plugs on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this video tutorial, you will learn how to remove and replace the engine spark plugs on a Suzuki SX4, as well as on a Fiat Sedici with a petrol en…
How to Replace the Spark Plugs in the Suzuki SX4?
How to Replace the Spark Plugs in the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this tutorial, you will see how to replace the spark plugs in the Suzuki SX4, a very simple operation. Before proceeding, wait for the engine to c…
How to Replace the Spark Plugs on a Suzuki SX4
How to Replace the Spark Plugs on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Unclip the bonnet using the designated lever and lift it. Next, unscrew the bolts securing the upper engine cover to access the ignition coils for ea…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos