Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Ignis
    4. : How to change the engine oil on a Suzuki Ignis.

Suzuki Ignis - Video tutorial

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Engine oil
Operation: How to change the engine oil on a Suzuki Ignis.

If we want to proceed with changing the oil and oil filter on this car model, in the description below we have provided all the information and steps to carry out this operation correctly. After opening the engine hood and lifting the car, open the oil filler cap and then from under the car, unscrew the drain plug. Then locate the oil filter and unscrew it with a special key, then replace it with the new one and screw it back on after replacing the gasket. Then close the oil drain plug and return to the engine compartment to fill the circuit with the new lubricant.


Posted on 23 May 2023 by ScegliAuto



Resetting the service light on the Suzuki Ignis MK3
Suzuki Ignis (2016-2024 / MK 3) In this video we see how the lighting up of an orange warning light with the inscription Oil, and a wrench above the tachometer of the Suzuki Ignis,
How to reset the oil service in the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) Resetting the oil service in the Suzuki Ignis is very simple, let's see how to do it in this tutorial. Obviously, this procedure should only be follo
How to reset the oil service on the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) In this tutorial, we can see how to reset the oil service in the Suzuki Ignis, an extremely simple and quick operation. Before proceeding, make sure

Other guides that may interest you

    Frequently Asked Questions

    • Ignis 2016-2024 - What to do if the yellow oil warning light comes on on Suzuki Ignis? Read Answer
    • Ignis 2016-2024 - What does the oil warning light on Suzuki Ignis mean? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos