Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the motor oil on the Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

See other generations:
Video tutorial

Today we will show you the steps to replace the motor oil on the Suzuki Ignis after the oil light comes on. The first thing to do is to open the front hood and unscrew the oil tank cap. The second thing to do is to unscrew the nut that secures the oil pan cap, located on the bottom of the vehicle, and wait for the oil to drain out. Once finished, close the oil pan cap. Finish the replacement by topping up the oil tank with approximately 5 liters of oil. Before finishing the top-up, start the car to circulate the oil.


Posted on 28 November 2024 by ScegliAuto


Related tutorials

Suzuki Ignis (2016-2024 / MK 3) This guide shows how to turn off the low oil pressure warning light on the Suzuki Ignis. This operation does not require any specific tools. The firs…
Suzuki Ignis (2016-2024 / MK 3) This short and simple guide will show us how to reset the maintenance service light for the regular oil change of the Suzuki Ignis. First, we get int…
Suzuki Ignis (2016-2024 / MK 3) In the previous videos, we saw how to proceed with the oil change on a 2016 Suzuki Ignis vehicle, an operation that can easily be done independently.…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos