Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on the Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

This guide shows how to turn off the low oil pressure warning light on the Suzuki Ignis. This operation does not require any specific tools.

The first step is to turn on the instrument cluster; using the cruise control speed selection button, navigate to the "oil change" option using the "+" and "-" buttons, and press the "Info" button. At this point, select the "reset" option and press the "Info" button for a few seconds.

You can then turn off the ignition. The next time you start the vehicle, the oil change message will no longer be displayed.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Suzuki Ignis
How to Change the Engine Oil on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Today, you will learn the steps to change the engine oil on a Suzuki Ignis after the oil warning light comes on. The first step is to open the bonnet…
How to reset the service light on the Suzuki Ignis.
How to reset the service light on the Suzuki Ignis.
Suzuki Ignis (2003-2008 / MK 2) Let's see how to reset the service light on the Suzuki Ignis: before turning on the ignition, make sure that the doors, the hood, and the trunk are p…
How to Reset the Service Light on a Suzuki Ignis?
How to Reset the Service Light on a Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) To reset the service light on the Suzuki Ignis, turn on the ignition and press the INFO button next to the instrument cluster. Pressing the button wi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos