Do it yourself
| ||||
|
Suzuki Vitara - Video tutorial
Model: Suzuki Vitara
LY
- Years 2015-2023 The procedure for resetting the tire pressure warning light on the Suzuki Vitara involves inflating the tires to the recommended pressure values: these values are indicated on the sticker that is glued to the driver's door pillar. Once the tires have been inflated, it will be possible to start the engine by inserting the ignition key into the ignition switch: when the car is then started, it will be possible to drive for a few kilometers so that the sensors can read the new pressure values and turn off the warning light.
Posted on 11 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |