Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulb of the Dacia Sandero 3

Model: Dacia Sandero MK 3 - Years 2021-2026
Part:

In the following guide, we will describe all the necessary steps to correctly replace the third brake light bulb on your Dacia Sandero Mk3. First, make sure you have a new bulb that is perfectly compatible with the car, then lift the rear hood and remove the two rubber caps located in the central area of the hood. Next, pull the third brake light towards you and remove the faulty bulb. Finally, install the new bulb and reposition the brake light along with the two rubber caps that were previously removed.

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light on a Dacia Sandero
How to Remove the Third Brake Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) To remove the third brake light on a Dacia Sandero, open the rear hatch and unscrew the two Torx screws. Then, there are two clips; open them and dis…
How to replace the bulb and the third brake light of the Dacia Sandero
How to replace the bulb and the third brake light of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) Today we will see the instructions that will allow us to disassemble and replace the bulbs and the third brake light of the Dacia Sandero. First of a…
How to replace the license plate light of the Dacia Sandero
How to replace the license plate light of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the license plate light on a Dacia Sandero car is an operation that follows simple and quick steps to be carried out independently. After p…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos