Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace the rear brake light bulb on Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Rear light bulb
Operation: How to replace the rear brake light bulb on Dacia Sandero

To replace the rear brake light bulb in the Dacia Sandero we must first open the tailgate of the luggage compartment. At this point, let's go and see (inside the luggage compartment itself) the rear part of the light concerned in order to replace the brake bulb. We find a knob that locks the entire headlight in place. We unscrew the same and, after disconnecting the power supply, we can remove the light itself. Once this is done, we can remove the rear part of the light (which houses the bulb housing) and thus have access to the bulb that we need to replace. At the end of the operation we proceed to reassemble everything by carrying out the same operations described above but by following the procedure in reverse.


Posted on 4 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos