Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb in the Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

See other generations:
Video tutorial

To replace the rear light bulb in the Dacia Sandero, open the tailgate to access the side of the boot. Here, you will find a knob that needs to be completely unscrewed to detach the rear light using your hands, disconnecting its connector at the back.

This way, you can open the light from the back and remove the old bulb from its housing. At this point, you can insert a new bulb and close the light, which should be reconnected to the connector and secured in its housing.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Dacia Sandero
How to replace the rear headlight bulb of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) In the following guide you will find the description of the procedure you need to follow to safely replace the rear headlight bulb of your first gene…
How to Replace the Air Filter of the Dacia Sandero
How to Replace the Air Filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is likely time to replace the air filter. This guide will explain t…
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos