Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Flap of a Fiat Panda That is Stuck

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel cap

See other generations:
Video tutorial

In this video, see how to open the fuel flap of a Fiat Panda that is stuck and cannot be opened from the outside. This is quite a serious problem as it prevents refuelling.

You will likely need to have the flap repaired by a body shop, but in the meantime, how can you refuel? Fortunately, Fiat technicians have considered this situation. Simply open the rear hatch, and once open, you will notice a small loop made of a red cord on the passenger side, located right by the flap: pull it and it will open, allowing you to refuel.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Location of the Inertia Switch on the Fiat Panda
Location of the Inertia Switch on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If, following a severe impact, the Fiat Panda fails to restart, it is likely due to the inertia switch blocking the fuel supply to the engine. The in…
How to resolve water accumulation in the footwell of a Fiat Panda
How to resolve water accumulation in the footwell of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The problem with this Fiat Panda was water causing excessive humidity in the cabin, misted windows, and wet carpets. The cause was blocked drainage h…
How to replace the rear headlight bulb of the Fiat Panda 3
How to replace the rear headlight bulb of the Fiat Panda 3
Fiat Panda (2012-2023 / ) If you own a Fiat Panda Mk3 and want to replace the bulb of one of the rear lights on your own, all you have to do is carefully read and follow the f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos