Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Suzuki Vitara

Model: Suzuki Vitara LY - Years 2015-2024
Part: Door trim panel

Today's main steps will show you how to remove and replace the rear door panel on the Suzuki Vitara. First, open the rear door and start removing the side plastic clips of the panel; then unscrew the fixing screws to gently detach the panel from the sides until it is completely removed, as illustrated in the video. At this point, you will have access to the inside of the door, the lock, and the window mechanism; then reassemble the rear door panel, securing everything properly with the screws.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door panel of the Suzuki Vitara
How to disassemble the rear door panel of the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) The following steps will illustrate the process of disassembling the rear door panel of the Suzuki Vitara, following the instructions below. First, w…
Removing the Boot Door Panel on a Suzuki Vitara MK1
Removing the Boot Door Panel on a Suzuki Vitara MK1
Suzuki Vitara (1988-1998 / TA, MK 1, ET) In this video tutorial, you will learn how to remove the boot door panel on the first generation Suzuki Vitara by following these simple and quick st…
How to Remove the Door Panel (Front Right) on a Suzuki Vitara
How to Remove the Door Panel (Front Right) on a Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) How to remove the door panel (front right) on a Suzuki Vitara? Follow these steps: disconnect the battery terminals located in the engine bay, using …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos