Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Suzuki Grand Vitara?

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper blades on a Suzuki Grand Vitara, lift the blades so that they are not in contact with the windscreen. Once detached, tilt the blade away from the arm and release the pin that connects it. By performing the same operation on the other side, you can remove the old blades and then position the new ones.

These can now be secured with the respective clips, repositioning them on the windscreen and checking that everything is functioning.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Dismantling the Wiper Motor of the Suzuki Grand Vitara
Dismantling the Wiper Motor of the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) In today's video, we will see the main instructions for dismantling and replacing the wiper motor of the Suzuki Samurai, following these simple steps…
Where are the fuses located in the Suzuki Grand Vitara?
Where are the fuses located in the Suzuki Grand Vitara?
Suzuki Grand Vitara (2005-2015 / MK 2) The fuse boxes installed on the Suzuki Grand Vitara are responsible for containing the fuses that regulate the operation of the devices installed on …
Where are the fuses located in the Suzuki Grand Vitara?
Where are the fuses located in the Suzuki Grand Vitara?
Suzuki Grand Vitara (1999-2005 / MK 1) Inside the Suzuki Grand Vitara, it will be possible to find two boxes that contain all the fuses that will be present on the car: in this type of veh…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos