Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Xenon Headlights

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Xenon headlight kit

See other generations:
Video tutorial

This guide shows how to install a xenon headlight kit for your car. The steps are simple, but a good level of manual dexterity is required. To remove the headlight units, you will need to take off the front bumper.

Using a screwdriver, remove the original bulb and replace it with the one from the xenon kit. Refit the headlights in their positions and securely attach the ballast units, then make the electrical connections. The car in the video is a Suzuki Swift, but the procedure is very similar for all vehicles.

However, remember to check if your car is approved for road use with xenon headlights.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlights on a Suzuki Swift MK5 (2015)
Replacing the Front Headlights on a Suzuki Swift MK5 (2015)
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Today, in this video tutorial, you will learn how to remove and replace the front headlights on a 2015 Suzuki Swift MK5. First, remove the front bump…
Replacing the Front Headlight Bulb on a Suzuki Swift
Replacing the Front Headlight Bulb on a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Want to change the front headlight bulbs on a Suzuki Swift but don't know how? Here's how to proceed. Open the bonnet by pulling the lever located at…
How to Replace the Battery in the Suzuki Swift
How to Replace the Battery in the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Below are the necessary instructions to remove and replace the battery in the Suzuki Swift, following these simple and quick steps. First, open the b…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos