Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Joymax Z
Part: Battery

In this video we can see where the battery is located in the SYM Joymax Z scooter, useful in case we need to replace it, a very simple and quick operation. As shown, the battery is located inside the small storage compartment on the left side, right next to the ignition switch. To replace the battery, make sure first that the key is not inserted, then open the indicated door and unscrew the two screws of the mounting bracket. Finally, disconnect both terminals starting from the negative one, insert the replacement if necessary and follow the reverse procedure.

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service on the SYM Joymax Z scooter?
How to reset the oil service on the SYM Joymax Z scooter?
Joymax Z In this tutorial we can see how to reset the oil service in the SYM Joymax Z scooter, an extremely simple and quick operation, to be carried out only…
How to Replace the Rear Tyre on a Sym Joymax Z 125
How to Replace the Rear Tyre on a Sym Joymax Z 125
Joymax Z This guide provides instructions on how to remove and replace the rear wheel and tyre of the Sym Joymax Z 125 scooter, following these simple steps. …
How to Replace the Variator on the Sym Joymax 125 Z
How to Replace the Variator on the Sym Joymax 125 Z
Joymax Z In this guide, follow the instructions to dismantle and replace the variator of the Sym Joymax 125 Z scooter by following these simple steps. First, …

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos