Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Variator on the Sym Joymax 125 Z

Model: Sym Joymax Z
Part:

Video tutorial

In this guide, follow the instructions to dismantle and replace the variator of the Sym Joymax 125 Z scooter by following these simple steps. First, place your scooter on the centre stand and start unscrewing the screws securing the transmission cover; then, unscrew the nut of the fan and the clutch bell, disconnecting and removing the drive belt as shown in the video.

At this point, remove and replace the variator along with the rollers inside it; reassemble the transmission and the outer cover!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Joymax Z This guide provides instructions on how to remove and replace the rear wheel and tyre of the Sym Joymax Z 125 scooter, following these simple steps. …
Joymax Z This guide will provide instructions for removing and replacing the rear wheel and tyre of the Sym Joymax Z 125 scooter. First, place the scooter on …
Joymax Z Today's steps will show you how to remove and replace the rear brake pads on the Sym Joymax Z 125 scooter. First, place the scooter on the centre sta…

How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050

Today, let's see how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter cartridge, as shown in the video. At this point, screw on and gently tighten the new oil filter, and finally top up with new oil!

Watch the video!


by ScegliAuto

More videos