Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Jet X 125
Part: Shocks

In order to replace the rear shock absorbers of the Sym Jet X 125, you need to access the rear part of the motorcycle, located between the rear fender and the swingarm: both on the top and bottom of each shock absorber. Once the screws that secure the shock absorber have been loosened, it will be possible to remove it from its housing, so that the new replacement part can be inserted; the latter must be properly fixed in place. This way, it will be possible to verify that everything works correctly, securing all components.

Posted on 9 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Jet X 125 To adjust the shock absorbers on the Sym Jet X 125, use the screwdriver provided at the time of purchase. Insert the screwdriver into the hole locate…
Jet X 125 The engine oil of the Sym Jet X 125 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once th…
Jet X 125 To replace the exhaust pipe of the Sym Jet X 125, you need to loosen the screws of the exhaust terminal supports, located near the rear wheel: once t…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos