Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Shock Absorbers on the Sym Jet X 125?

Model: Sym Jet X 125
Part: Shocks

Video tutorial

To adjust the shock absorbers on the Sym Jet X 125, use the screwdriver provided at the time of purchase. Insert the screwdriver into the hole located at the base of the shock absorber.

Pulling the screwdriver inward will lower the shock absorber: initially, it is stiff, which is the recommended condition for carrying a passenger. There is an intermediate position and then a position where the shock absorbers are soft.

The stiffness of the shock absorbers should be adjusted according to your needs and comfort.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Jet X 125 In order to replace the rear shock absorbers of the Sym Jet X 125, you need to access the rear part of the motorcycle, located between the rear fende…
Jet X 125 The engine oil of the Sym Jet X 125 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once th…
Jet X 125 To replace the exhaust pipe of the Sym Jet X 125, you need to loosen the screws of the exhaust terminal supports, located near the rear wheel: once t…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos