Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the speedometer bulbs on the Sym Joymax

Model: Sym Joymax Gts 125
Part: Light bulb

Video tutorial

In this video, we can see how to change the odometer bulbs on the Sym Joymax 125: we will need to remove the left rearview mirror and then remove the screws that hold the front windshield in place. Now we need to remove the front cover of the dashboard, removing two screws on the sides, which will allow us to remove it by levering it from the front at the bottom.

By doing this, we expose the odometer which has two cables that end with two connectors, which need to be disconnected, and four screws, two of which are inside. This way we remove the entire dashboard and by unscrewing four more screws we dismantle the odometer which has four more screws on the back that, when unscrewed, will allow us to access the bulb that needs to be changed.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Sym Joymax GTS 125
How to Replace the Front Brake Pads on a Sym Joymax GTS 125
Joymax Gts 125 Let's see in this brief video how to remove and replace the front brake pads on the Sym GTS Joymax 125 scooter in simple and quick steps. First, remo…
How to dismantle the engine of the Sym Joymax 125?
How to dismantle the engine of the Sym Joymax 125?
Joymax Gts 125 To dismantle the engine of the Sym Joymax 125, loosen the screws that secure the engine block to its housing, allowing you to disconnect the connecto…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos