Do it yourself
Frequently asked questions about cars and motorcycles
To replace the gearbox oil of the Sym CruiSym 125, you will need to loosen the drain plug of the transmission located on the lower side of the casing on the left side of the motorcycle, near the rear wheel: then it will be possible to drain all the old oil into a container. Once the oil has completely drained out, you can top up by pouring new oil through the same vent: you can insert the necessary amount of oil into the casing using a pump.

Posted on 11 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Cruisym 125 To replace the engine oil of the Sym CruiSym 125, loosen the drain plug of the oil sump located at the bottom of the vehicle, just in front of the re…
Cruisym 125 In order to replace the front headlight of the Sym Cruisym 125, you need to loosen the screws that secure the front fairings of the motorcycle, so th…
Cruisym 125 To remove the engine from the Sym CruiSym 125, loosen the bolts securing the engine block to its housing, completely removing it and disconnecting th…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos