Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Cruisym 125
Part: Battery

To replace the battery on the Sym CruiSym 125, loosen the screws securing the panel located at the bottom left of the handlebars. Once these screws are loosened, you can detach the panel and locate the battery underneath. Remove the battery from its securing screws and disconnect the power cables. This will allow you to insert a new battery in its place, connecting it to the cables and securing it with the appropriate bolts; after installation, refit the panel.

Updated on 6 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the transmission oil of the Sym CruiSym 125?
How do you replace the transmission oil of the Sym CruiSym 125?
Cruisym 125 To replace the gearbox oil of the Sym CruiSym 125, you will need to loosen the drain plug of the transmission located on the lower side of the casing…
How to Replace the Engine Oil of the Sym CruiSym 125?
How to Replace the Engine Oil of the Sym CruiSym 125?
Cruisym 125 To replace the engine oil of the Sym CruiSym 125, loosen the drain plug of the oil sump located at the bottom of the vehicle, just in front of the re…
How to remove the engine from the Sym CruiSym 125?
How to remove the engine from the Sym CruiSym 125?
Cruisym 125 To remove the engine from the Sym CruiSym 125, loosen the bolts securing the engine block to its housing, completely removing it and disconnecting th…

How to Remove the Fairings of the KTM EXC 500

In this brief and simple guide, you will find instructions to remove and replace all the plastic fairings of the KTM EXC 500. First, place your bike on a stand and start unscrewing the screws of the plastic fairings located on the sides; then remove the plastic cover of the fuel tank by unscrewing the side screws, followed by the removal of the front mudguard and the rear tail, as shown in the video. At this point, disconnect any wiring from the plastics, replacing them if necessary, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos