Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Cruisym 125
Part: Headlight

In order to replace the front headlight of the Sym Cruisym 125, you need to loosen the screws that secure the front fairings of the motorcycle, so that they can all be detached: these screws are located inside the wheel arch and immediately behind the handlebars. Once the screws have been loosened and the fairings have been detached, you can locate the screws that secure the front light unit, so that it can be removed and disconnected from its connectors. The new headlight can then be inserted, secured, and the fairings reassembled.

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the transmission oil of the Sym CruiSym 125?
How do you replace the transmission oil of the Sym CruiSym 125?
Cruisym 125 To replace the gearbox oil of the Sym CruiSym 125, you will need to loosen the drain plug of the transmission located on the lower side of the casing…
Resetting the Engine Oil Light on the Sym CruiSym 125
Resetting the Engine Oil Light on the Sym CruiSym 125
Cruisym 125 In this brief and simple guide, we will go through the steps to reset the engine oil light on the Sym Cruisym 125 scooter. First, place the scooter o…
How to remove the engine from the Sym CruiSym 125?
How to remove the engine from the Sym CruiSym 125?
Cruisym 125 To remove the engine from the Sym CruiSym 125, loosen the screws that secure the engine block within its corresponding housing: this is located in th…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos