Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Sym MaxSym 400i?

Model: Sym Maxsym 400
Part: Exhaust muffler

Video tutorial

It will be possible to replace the exhaust pipe of the Sym MaxSym 400i by loosening the screws that fix the exhaust terminal to the appropriate supports, on the right side of the motorcycle: once the fixing screws of the supports have been loosened, it will also be possible to widen the connecting clamp located between the exhaust pipe and the manifold.

At this point, the new replacement piece can be inserted so that it can be fixed: after installation, it will be possible to tighten and connect everything to verify that everything works properly.


Posted on 12 July 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Sym MaxSym 400i?
How to Replace the Exhaust on a Sym MaxSym 400i?
Maxsym 400 To replace the exhaust on the Sym MaxSym 400i, loosen the screws that secure it to its housing near the rear wheel on the right side of the vehicle: …
How to Clean the Chain of the Sym MaxSym 400i?
How to Clean the Chain of the Sym MaxSym 400i?
Maxsym 400 To clean the chain of the Sym MaxSym 400i, remove the fairing by unscrewing all the bolts indicated in the video. At this point, you will be able to …
How do you replace the front fairing of the Sym MaxSym 400i?
How do you replace the front fairing of the Sym MaxSym 400i?
Maxsym 400 In order to replace the front fairing of the Sym MaxSym 400i, you need to loosen all the screws that fix the panels to their respective housing: star…

How to Replace the Headlamp Bulb on a Harley Davidson Street Bob

Today, we will guide you on how to dismantle and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand and start by removing the metal frame of the headlamp by unscrewing the fixing screw. Then, remove the optical unit and disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and replace the headlamp bulb with the correct type that has the same fitting (in this case, H4). Finally, reassemble the optical unit and secure the metal frame!

Watch the video!


by ScegliAuto

More videos