Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To clean the chain of the Sym MaxSym 400i, remove the fairing by unscrewing all the bolts indicated in the video. At this point, you will be able to remove the cover that protects the chain, the pulleys that tension it, and the chain itself. Clean and lubricate all the removed parts with an appropriate fluid, as shown in the video. Then, reassemble them by reversing the previous steps. It may take a few attempts to find the correct position of the chain and the pulleys. Once this is found, you can reattach the cover and the fairing.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Sym MaxSym 400i?
How do you replace the exhaust pipe of the Sym MaxSym 400i?
Maxsym 400 It will be possible to replace the exhaust pipe of the Sym MaxSym 400i by loosening the screws that fix the exhaust terminal to the appropriate suppo…
How to Replace the Exhaust on a Sym MaxSym 400i?
How to Replace the Exhaust on a Sym MaxSym 400i?
Maxsym 400 To replace the exhaust on the Sym MaxSym 400i, loosen the screws that secure it to its housing near the rear wheel on the right side of the vehicle: …
How to Replace the Engine Oil and Oil Filter on the Sym MaxSym 400i
How to Replace the Engine Oil and Oil Filter on the Sym MaxSym 400i
Maxsym 400 Follow the procedure to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sym MaxSym 400i scooter. First, p…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos