Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Sym MaxSym 400i

Model: Sym Maxsym 400
Part: Engine oil

Video tutorial

Follow the procedure to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sym MaxSym 400i scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws securing the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video.

Finally, unscrew the filler screw and top up with new oil!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Sym MaxSym 400i?
How to Replace the Exhaust on a Sym MaxSym 400i?
Maxsym 400 To replace the exhaust on the Sym MaxSym 400i, loosen the screws that secure it to its housing near the rear wheel on the right side of the vehicle: …
How to Change the Engine Oil on the Sym MaxSym 400
How to Change the Engine Oil on the Sym MaxSym 400
Maxsym 400 You can change the engine oil on the Sym MaxSym 400 by loosening the drain plug on the oil sump, located at the central bottom of the scooter: once t…
How do you replace the exhaust pipe of the Sym MaxSym 400i?
How do you replace the exhaust pipe of the Sym MaxSym 400i?
Maxsym 400 It will be possible to replace the exhaust pipe of the Sym MaxSym 400i by loosening the screws that fix the exhaust terminal to the appropriate suppo…

How to Replace the Fork on the GasGas TXT 125?

To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresponding brake caliper and then loosen the nuts located on the sides of the central axle. Once the wheel is removed, you can loosen the screws that secure the fork from the top just below the steering: at this point, it will be possible to remove it completely so that you can insert the new one, securing it properly and checking its operation.

Watch the video!


by ScegliAuto

More videos