Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to reset the service on the SYM Jet 14 200 scooter, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First of all, we insert the key, then we turn on the instrument panel and, using the right button on the dashboard, we reach the odometer "ODO". We then hold down the left button, keep it in position and release it only once the service light has completely disappeared. Finally, we restart the instrument panel to complete the procedure.

Posted on 19 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil of the Sym Jet 14 200
How to Change the Transmission Oil of the Sym Jet 14 200
Jet 14 200 In this brief guide, we will see the instructions that will allow us to change the transmission oil of the Sym Jet 14 200 scooter. First, place the s…
How to Change the Engine Oil on the SYM Jet 14 200 Scooter
How to Change the Engine Oil on the SYM Jet 14 200 Scooter
Jet 14 200 In this tutorial, see how to change the engine oil on the SYM Jet 14 200 scooter, a very simple and quick operation. First, ensure that the engine is…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos