Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil of the Sym Crox 125

Model: Sym Crox 125
Part: Engine oil

Video tutorial

Today we will discover the steps that will allow us to carry out the ordinary maintenance of the Sym Crox 125 scooter, replacing the engine oil. First, we put the scooter on the center stand and begin to unscrew the oil drain bolt located under the engine, letting it drain into a container for about ten minutes; then we unscrew the fill cap and top up the oil until reaching the maximum level (all instructions are indicated in the user manual), as shown in the video.

Subsequently, the transmission oil is also replaced!


Posted on 5 August 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a SYM Crox 125 Scooter?
How to Reset the Oil Service on a SYM Crox 125 Scooter?
Crox 125 As seen in this brief tutorial, resetting the oil service on a SYM Crox 125 scooter is an extremely simple and quick operation. Before proceeding, en…
How to Open the Seat of a Sym Crox 125
How to Open the Seat of a Sym Crox 125
Crox 125 In this video tutorial, we will go through the steps to open the seat of the Yamaha Crox 125 scooter, following the instructions below. First, place …
How to Reset the Service Light on the Sym Crox
How to Reset the Service Light on the Sym Crox
Crox 125 In this new mini guide for all of you who own a Sym Crox, we will discover how to manually reset the service light without the intervention of a spec…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos