Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a SYM Crox 125 Scooter?

Model: Sym Crox 125
Part: Service warning light

Video tutorial

As seen in this brief tutorial, resetting the oil service on a SYM Crox 125 scooter is an extremely simple and quick operation. Before proceeding, ensure that all required scheduled maintenance tasks have been completed.

Start by inserting the key and turning on the instrument cluster, then switch the display to the "ODO" option and hold down the up arrow button. After about 5 seconds, the service light will disappear, and you can restart the scooter to confirm that the operation was successful.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to replace the engine oil of the Sym Crox 125
How to replace the engine oil of the Sym Crox 125
Crox 125 Today we will discover the steps that will allow us to carry out the ordinary maintenance of the Sym Crox 125 scooter, replacing the engine oil. Firs…
How to Open the Seat of a Sym Crox 125
How to Open the Seat of a Sym Crox 125
Crox 125 In this video tutorial, we will go through the steps to open the seat of the Yamaha Crox 125 scooter, following the instructions below. First, place …
How to Reset the Oil Service Light on the Kymco Crox 125
How to Reset the Oil Service Light on the Kymco Crox 125
Crox 125 To reset the Oil Service light on the Kymco Crox 125, turn on the instrument panel by turning the key in the ignition. Once the panel is on, press an…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos