Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Guide for changing the transmission oil of a Sym VTS 200cc scooter. Obtain a bottle of Motul Scooter Gear 2T/4T 80W90. Position the scooter on the centre stand. Place a low container to collect the used oil under the rear transmission. Using a ratchet and a 10mm socket, unscrew the oil drain plug located at the bottom and let it drain. Use a 13mm spanner to unscrew the oil filler plug located on the side. Once the oil has drained, screw the drain plug back in. Using a large syringe and a rubber tube, insert the oil (170ml).

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check the Coolant Level of the Sym VTS 200
How to Check the Coolant Level of the Sym VTS 200
Vts 200 In this guide, you will learn how to check the coolant level of the engine on the Sym VTS 200 scooter by following the instructions below. First, pla…
Dismantling the Instrument Cluster of the Sym VTS 200
Dismantling the Instrument Cluster of the Sym VTS 200
Vts 200 This guide outlines the main steps to dismantle and replace the instrument cluster of the Sym VTS 200 scooter. First, remove the front part of the sc…
How to Replace the Air Filter on a Sym VTS 200?
How to Replace the Air Filter on a Sym VTS 200?
Vts 200 To replace the air filter on a Sym VTS 200, you need to loosen the screws that secure the cover of the air filter box, located directly above the gea…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos