Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Sym Symphony SR 125?

Model: Sym Symphony 125
Part: Engine oil

Video tutorial

You can change the engine oil of the Sym Symphony SR 125 by loosening the drain plug located at the central lower part of the vehicle: once the plug is removed, allow all the used oil to flow into a suitably placed container. At this point, you can also remove the filter located in the same position to replace it with a new one; now proceed to top up by pouring the necessary amount of oil through the breather on the right side.

This way, you can start the engine and check that everything is functioning.


Posted on 23 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Sym Symphony 125?
How to Change the Engine Oil on a Sym Symphony 125?
Symphony 125 To change the engine oil on a Sym Symphony 125, loosen the screws securing the oil drain plug located at the central bottom of the vehicle. Once remo…
How to Change the Engine Oil in the SYM Symphony 125 Scooter?
How to Change the Engine Oil in the SYM Symphony 125 Scooter?
Symphony 125 In this tutorial, you will see how to change the engine oil in the SYM Symphony 125 scooter, a very simple and quick operation. First, ensure the eng…
How do you replace the engine oil of the Sym Symphony 125?
How do you replace the engine oil of the Sym Symphony 125?
Symphony 125 To replace the engine oil of the Sym Symphony 125, you need to loosen the drain plug located in the central lower part of the motorcycle: once the pl…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos