Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : 200 Evo

Model: Sym 200 Evo
Part: Engine oil

Classic oil change, very simple. Today, we will do it on a Sym 200 EVO. Start the engine for a few minutes to make the lubricant more fluid and facilitate drainage. As shown in the video, unscrew the lower drain plug of the oil and engine filter compartment, and also unscrew the upper plug to avoid vacuum and speed up the flow. While you're at it, remove the filter and clean it (if you want to change it, remember to lubricate the O-ring of the new part). Collect the used oil in a container, close the lower hole by screwing in the plug, pour in the new oil through the upper hole, and seal it.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Oil of the Sym HD 200
How to Change the Gear Oil of the Sym HD 200
Hd 200 Evo In this short and simple guide, you will see how to change the transmission oil of the Sym HD 200 scooter. First, place your scooter on the centre st…
How do you reset the Service light on the Sym HD 200 Evo?
How do you reset the Service light on the Sym HD 200 Evo?
Hd 200 Evo In order to reset the Service light of the Sym HD 200 Evo, you need to remove the dipstick for checking the oil level. If the oil level is between th…
How to Change the Engine Oil of the Sym HD 200
How to Change the Engine Oil of the Sym HD 200
Hd 200 Evo Today, follow these step-by-step instructions to change the engine oil and oil filter of the Sym HD 200 scooter. First, place the scooter on its cent…

How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?

To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the motorcycle, just under the rear mudguard and above the rear swingarm. Once the upper and lower bolts of the shock absorber are loosened, it can be extracted from its housing and replaced with a new spare part. At this point, refit the new shock absorber in its housing to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos