Do it yourself
Frequently asked questions about cars and motorcycles
For this model, use 10W-40 oil for 4-stroke engines. Start the engine for a few minutes to warm the oil, making it less viscous. Use a 17mm spanner to remove the bolt that acts as the drain plug from the lower drain hole, as shown in the video. Collect the used oil in a container and dispose of it properly. Meanwhile, unscrew the oil filter using the same 17mm spanner and screw on the new one. Tighten the drain plug bolt and refill the same amount of lubricant through the upper hole, using a funnel for assistance. To open the filler hole, simply unscrew the cap by hand.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jet14 200 When performing an oil change, always work with the engine warm (not too hot to avoid burns), so that the circulating oil heats up and becomes less v…
Jet14 200 Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
Jet14 200 To replace the air filter on the Sym Jet14 200, you need to loosen the bolts securing the cover that contains the air filter. This cover is located n…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos