Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service warning light on the Sym Jet 14 200.

Model: Sym Jet14 200
Part: Service warning light

Video tutorial

These short and simple instructions will show us how to reset the service light for the regular maintenance of the engine oil change on the Sym Jet 14 200 scooter. First, we put the scooter on the center stand and start by turning on the instrument panel by turning the key to position one; then we wait for the maintenance voice for the oil change to appear, then we press and hold the button on the left side of the panel (until the oil change light is reset), as shown in the video.

Finally, we turn off the panel and start the engine!


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Sym Jet14 200
How to Reset the "Service" Light on a Sym Jet14 200
Jet14 200 Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
How to replace the front mudguard of the Sym Jet14 200
How to replace the front mudguard of the Sym Jet14 200
Jet14 200 Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the cent…
How to Replace the Belt and Variator on the Sym Jet14 200
How to Replace the Belt and Variator on the Sym Jet14 200
Jet14 200 This guide briefly explains how to disassemble and replace the belt and variator on the Sym Jet14 200 scooter. First, place your scooter on the centr…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos