Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on Sym Jet14

Model: Sym Jet14 200
Part: Engine oil

Video tutorial

When performing an oil change, always work with the engine warm (not too hot to avoid burns), so that the circulating oil heats up and becomes less viscous, facilitating the subsequent draining. The oil drain hole on the Sym Jet14 200 is located on the left side of the scooter, as shown in the video.

Remove the screw that acts as a plug for this hole and collect the used oil in a container (dispose of it correctly). The oil fill hole is located on the right side of the scooter, approximately at the same height.

It is advisable to carry out this operation periodically.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Sym Jet14 200
How to Reset the "Service" Light on a Sym Jet14 200
Jet14 200 Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
Oil and Oil Filter Change on Sym Jet14 200
Oil and Oil Filter Change on Sym Jet14 200
Jet14 200 For this model, use 10W-40 oil for 4-stroke engines. Start the engine for a few minutes to warm the oil, making it less viscous. Use a 17mm spanner t…
How to replace the front mudguard of the Sym Jet14 200
How to replace the front mudguard of the Sym Jet14 200
Jet14 200 Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the cent…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos