Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Replace the Battery on a Sym Jet Power 125

Model: Sym Jet Power 125
Part: Battery

Video tutorial

In this brief tutorial, you will see the steps to dismantle and replace the engine battery on a Sym Jet Power 125 scooter. First, position your scooter on the centre stand and unscrew the screws securing the battery cover found on the floorboard; then, once removed, disconnect the two battery terminals using a cross screwdriver or a socket spanner.

Next, lift and remove the battery, replacing it with a new one of the correct type; reassemble everything by applying the reverse procedure!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Battery on the Sym Jet Power 125
Removing and Replacing the Battery on the Sym Jet Power 125
Jet Power 125 Today's instructions will show you how to remove and replace the battery on the Sym Jet Power 125 scooter in simple, quick steps. First, place the sc…
How to Replace the Exhaust of the Sym Jet Power 125?
How to Replace the Exhaust of the Sym Jet Power 125?
Jet Power 125 To replace the exhaust of the Sym Jet Power 125, loosen the screws that secure it to its mounts. Once these screws are loosened, remove the retaining…
How to Replace the Fuel Tap on a Sym Jet Power 125
How to Replace the Fuel Tap on a Sym Jet Power 125
Jet Power 125 In this guide, we will see the instructions that will allow us to remove and replace the fuel tap on the Sym Jet Power 125 scooter. First, place the …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos