Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Battery on the Sym Jet Power 125

Model: Sym Jet Power 125
Part: Battery

Video tutorial

Today's instructions will show you how to remove and replace the battery on the Sym Jet Power 125 scooter in simple, quick steps. First, place the scooter on its centre stand and start unscrewing the screws securing the plastic battery cover; then unscrew the screws of the central bracket and disconnect both battery terminals (positive and negative), as shown in the video.

At this point, remove the battery from its compartment, replace it with the new original one; connect it and finally reassemble the plastic cover!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Dismantle and Replace the Battery on a Sym Jet Power 125
How to Dismantle and Replace the Battery on a Sym Jet Power 125
Jet Power 125 In this brief tutorial, you will see the steps to dismantle and replace the engine battery on a Sym Jet Power 125 scooter. First, position your scoot…
How to Replace the Engine Oil of the Sym Jet Power 125
How to Replace the Engine Oil of the Sym Jet Power 125
Jet Power 125 Below are the instructions for replacing the engine oil and oil filter of the Sym Jet Power 125 scooter. First, place the scooter on its centre stand…
How to Replace the Exhaust of the Sym Jet Power 125?
How to Replace the Exhaust of the Sym Jet Power 125?
Jet Power 125 To replace the exhaust of the Sym Jet Power 125, loosen the screws that secure it to its mounts. Once these screws are loosened, remove the retaining…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos