Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Shark 125rs

How to Remove the Front Wheel of a Sym Shark 125RS?

Model: Sym Shark 125rs
Part: Wheel

Video tutorial

Before starting, lift your Sym Shark 125RS. Begin by unscrewing and removing the bolts that secure the front brake caliper to the fork, then move the brake caliper itself. Next, unscrew and remove the nut that secures the front wheel spindle.

Once the spindle nut is removed, you can take out the spindle itself. At this point, remove the front wheel of your Sym Shark 125RS. Once this step is completed, you will have successfully disassembled it.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the Sym Voyager GTS 125
How to Remove the Front Wheel of the Sym Voyager GTS 125
Voyager Gts 125 In this brief and simple guide, you will learn how to remove the front wheel and replace the tyre of the Sym Voyager GTS 125 scooter, as well as the …
Replacing the Front Wheel on Sym 300 GTS
Replacing the Front Wheel on Sym 300 GTS
Gts 300i Today, you will see a very simple step, which is replacing the front wheel on the Sym GTS 300. As shown in the video, before proceeding, place a supp…
How to Replace the Front Tyre on the Sym Wide Evo 125
How to Replace the Front Tyre on the Sym Wide Evo 125
Wide Evo 125 Below are the main steps that will allow you to remove and replace the front wheel and tyre of the Sym Wide Evo 125 scooter. First, place your scoote…

Replacing the Headlamp Bulb on a Piaggio Vespa GTV 300

Today's instructions will show you the procedure to disassemble and replace the headlamp bulb on a Piaggio Vespa GTV 300. First, place your scooter on the centre stand and begin by releasing the headlamp from the side. Then, disconnect the electrical connector of the bulb and unclip the metal spring to remove it from the headlamp, as shown in the video. At this point, install the new dipped beam bulb of the correct type and with the same fitting; make the electrical connection and test the operation before refitting the headlamp!

Watch the video!


by ScegliAuto

More videos