Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Tw 200
Part: Air filter

In this tutorial, see how to replace the air filter in a Yamaha TW 200, a very simple and quick operation. First, wait for the engine to cool down sufficiently to operate safely, then remove the left side panel. Next, unscrew the four screws around the perimeter of the airbox, remove the cover, and separate the old filter from it. Clean any dirt residue inside the housing, place the new part, and reassemble everything by following the reverse procedure.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Tw 200 In this tutorial, we can see how to replace the motor oil in the Yamaha TW 200, a very simple and fast operation. First of all, make sure that the en…
Tw 200 In this tutorial we can see how to replace the engine oil in the Yamaha TW 200, an extremely simple and quick operation, to be carried out every 12 m…
Tw 200 In this tutorial, you will see how to change the engine oil on a Yamaha TW 200, a very simple and quick operation. First, ensure the engine is suffic…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos