Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Jet 14 150
Part: Engine oil

To change the engine oil on a Sym Jet14 200, access the underside of the scooter at the exhaust level. Here, you will find the engine oil drain plug, which must be opened to collect the used oil in a suitably positioned container. Once the oil has completely drained, remove the oil filter located in the same position and replace it with a new spare part. After this has been fitted, top up the oil through the designated hole on the side of the scooter.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jet 14 150 To change the engine oil on the Sym Jet14 150, unscrew the drain plug located at the central lower part of the bike, just behind the stand: once the …
Jet 14 150 In this tutorial, we will see how to change the engine oil in the SYM Jet 14 150 scooter, a very simple and quick operation. First, ensure that the e…
Jet 14 150 Follow these step-by-step instructions to replace the engine oil and carry out the routine maintenance service on the Sym Jet 14 150 scooter. First, …

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos