Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Sym Jet 14 150

Model: Sym Jet 14 150
Part: Engine oil

Video tutorial

Follow these step-by-step instructions to replace the engine oil and carry out the routine maintenance service on the Sym Jet 14 150 scooter. First, place the scooter on its centre stand and start by removing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then clean the drain plug thoroughly before refitting it. Next, remove the filler screw and top up with the new oil, using oil that meets the required specifications (as stated in the user and maintenance manual).


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Windscreen on the Sym Jet 14 150 (2021)
Guide to Replacing the Windscreen on the Sym Jet 14 150 (2021)
Jet 14 150 In this guide, you will find the main instructions on how to remove and replace the windscreen of the Sym Cruisym 150 Jet 14 scooter, as well as othe…
How to Change the Engine Oil in the SYM Jet 14 150 Scooter?
How to Change the Engine Oil in the SYM Jet 14 150 Scooter?
Jet 14 150 In this tutorial, we will see how to change the engine oil in the SYM Jet 14 150 scooter, a very simple and quick operation. First, ensure that the e…
How to Change the Engine Oil of the Sym Jet14 150?
How to Change the Engine Oil of the Sym Jet14 150?
Jet 14 150 To change the engine oil on the Sym Jet14 150, unscrew the drain plug located at the central lower part of the bike, just behind the stand: once the …

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos